连续体结构拓扑优化应力约束凝聚化的ICM方法

为克服应力约束下拓扑优化问题约束数目多、应力敏度计算量大的困难，提出 了应力约束化凝聚化的ICM方法. 在利用Mises强度理论将应力约束转换成应变能约束后， 提出了应力约束凝聚化的两条途径：其一为应力全局化的方法，其二为应力约束集成化的方 法. 由此建立了多工况下以重量为目标、以凝聚化应变能为约束的连续体结构优化模型，并 利用对偶理论对优化模型进行了求解. 4个数值算例表明：该方法具有较高的计算效率，得 到的拓扑结构比较合理，不仅适用于二维连续体结构，也适用于三维连续体结构.     

基于支持向量回归机的陀螺漂移预测模型

为了预测某导弹陀螺漂移趋势,以该陀螺漂移角速度时间序列为对象,建立了基于支持向量回归机的预测模型。针对该预测模型的特点,提出了支持向量预选取的模型优化方法。基于ε不敏感损失函数的支持向量回归机具有稀疏性,其结构由支持向量决定。因此从训练样本集中预选出有可能成为支持向量的样本,精简样本规模是提高该类支持向量回归机训练和预测效率的有效方法。针对该类支持向量回归机从分类和回归两个角度分析了支持向量的几何特征,提出了核函数空间免疫聚类的支持向量预选取方法并用于某导弹陀螺漂移预测模型的数据预处理。仿真结果表明优化后的预测模型运算量小、建模速度快,精度高。     

延性单晶非均匀变形的三维有限元模拟

对延性单晶在拉伸载荷作用下的应变局域化和颈缩等非均匀变形过程进行了三维有限元数值模拟。将相关晶体塑性本构模型及一种新的数值积分方法补充到ABAQUS6.1商用有限元软件中。该方法的特点是，利用晶体塑性的动力学方程，获得一个关于晶体弹性变形梯度的演化方程，采用半隐式积分方案进行求解。本文推导出一种新的应力变本构矩阵。按此方式更新本构矩阵，计算速度和计算稳定性大大提高。加载方式，边界条件和变形程度等因素影响着滑移系的启动状况，这是平面模型所不能预测的。本文利用三维有限元方法模拟了不同取向下滑移系的启动状况，全面地考虑了FCC单晶材料12个可能滑移系在变形过程中的启动状况，合理地模拟了FCC面心立方单晶沿不同取向加载时晶轴旋转导致的应变局域化和颈缩等非均匀变形过程。     

Multiple Non-Smooth Events in Multi-Degree-of-Freedom Vibro-Impact Systems

The behaviour of a multi-degree-of-freedom vibro-impact system is studied using a 2 degree-of-freedom impact oscillator as a motivating example. A multi-modal model is used to simulate the behaviour of the system, and examine the complex dynamics which occurs when both degrees of freedom are subjected to a motion limiting constraint. In particular, the chattering and sticking behaviour which occurs for low forcing frequencies is discussed. In this region, a variety of non-smooth events can occur, including newly studied phenomena such as sliding bifurcations. In this paper, the multiple non-smooth events which can occur in the 2 degree-of-freedom system are categorised, and demonstrated using numerical simulations.     

任意多椭圆孔多裂纹无限大各向异性板应力强度因子求解的一种新方法

采用各向异性体平面弹性理论中的复势方法,应用保角变换技术,以F aber级数为工具,导出含任意多椭圆孔和裂纹群无限大各向异性板在远场载荷作用下其应力场和位移场的级数解,并在此基础上利用断裂力学方法确定裂纹尖端的应力强度因子,通过算例讨论了材料参数及裂纹、孔的尺寸等对应力强度因子的影响规律,得出了一些有益的结论。数值结果表明本文方法具有计算精度高、收敛速度快、方便快捷等优点,有利于全面系统地研究各参数对结构断裂性能的影响。     

多模式自适应重要抽样法及其应用

针对多模式的可靠性分析，研究了其失效概率计算的自适应重要抽样法，该方法用模拟退火 算法来自动调整每个失效模式的重要抽样函数，使其逐渐趋近于估计方差最小的重要抽样 函数. 对于多个模式系统失效概率的计算，采用混合加权自适应重要抽样的方法, 反映了每个 失效模式对系统失效概率的贡献；对于系统失效模式所含基本变量不全相同的情况，提出了 扩展自适应重要抽样法, 来统一所有失效模式中的基本变量，从而使得混合自适应 重要抽样, 可以方便地求解变量不全相同时的系统失效概率. 对估计值方差和变异系数的计算公 式进行了推导. 验证算例结果, 充分说明方法的合理性与可行性.     

Non-linear vibrations and frequency response analysis of piezoelectrically driven microcantilevers

Microcantilevers have recently received widespread attentions due to their extreme applicability and versatility in both biological and non-biological applications. Along this line, this paper undertakes the non-linear vibrations of a piezoelectrically driven microcantilever beam as a common configuration in many scanning probe microscopy and nanomechanical cantilever biosensor systems. A part of the microcantilever beam surface is covered by a piezoelectric layer (typically ZnO), which acts both as an actuator and sensor. The bending vibrations of the microcantilever beam are studied considering the inextensibility condition and the coupling between electrical and mechanical properties in the piezoelectric materials. The non-linear terms appear in the form of quadratic expression due to presence of piezoelectric layer, and cubic form due to geometrical non-linearities. The Galerkin approximation is then utilized to discretize the equations of motion. In addition, the method of multiple scales is applied to arrive at the closed form solution for the fundamental natural frequency of the system. An experimental setup consisting of a commercial piezoelectric microcantilever attached on the stand of a state-of-the-art microsystem analyzer for non-contact vibration measurement is utilized to verify the theoretical developments. It is found that the experimental results and theoretical findings are in good agreement, which demonstrates that the non-linear modeling framework could provide a better dynamic representation of the microcantilever than the previous linear models. Due to microscale nature of the system, excitation amplitude plays an important role since even a small change in the amplitude of excitation can lead to significant vibrations and frequency shift.     

地震作用下结构的AMTMD主动控制策略

提出了一种新的控制策略——主动多重调谐质量阻尼器(AMTMD)．AMTMD控制系统频率呈线性分布．AMTMD保持相同的刚度和阻尼但质量变化．AMTMD的主动控制力采用Roorda(1975)提出的生成模式．基于结构的广义振型模型，导出了设置AMTMD时结构的动力放大系数(DMF)．于是AMTMD优化准则选择为结构最大动力放大系数的最小值的最小化．分别使用位移、速度和加速度传感器，通过最优搜寻，研究了反映AMTMD有效性和鲁棒性的参数．这些参数包括：频率间隔、平均阻尼比、调谐频率比、Min．Min．Max．DMF、标准化反馈增益系数和环增益系数．为比较，同时考虑了多重调谐质量阻尼器和主动调谐质量阻尼器．而且，数值结果表明：AMTMD比MTMD具有更高的有效性和鲁棒性且ATMD也有更高的有效性．     

Experimental dynamic analysis of elastic-plastic shear frames with secondary structures

Various experimental models are developed to study the influence of lightweight secondary structures on the dynamic response of elastic and elastic-plastic shear frames. Small-scale two-story model frames, with an elastic single-degree-of-freedom secondary structure attached, are considered for sinusoidal and random in-plane support excitation. Both elastic and elastic-plastic responses are recorded by varying the material properties of the columns of a distinguished floor. Parametric studies are performed by varying the secondary structure's fundamental frequency and damping. Experimental results are compared with those obtained by computational simulations. Experimental and numerical results are in excellent agreement, however they show that the material properties have to be determined very carefully. The statistic response of randomly excited elastic-plastic structures is not much affected by the motion of tuned secondary structures. However, this dynamic behavior is not true for elastic main structures. In this case, an optimally tuned secondary structure decreases the structural response up to 25%.     

悬索在考虑1:3内共振情况下的动力学行为

研究了悬索在受到外激励作用下考虑1∶3内共振情况下的两模态非线性响应.对于一定范围内悬索的弹性-几何参数而言,悬索的第三阶面内对称模态的固有频率接近于第一阶面内对称模态固有频率的三倍,从而导致1∶3内共振的存在.首先利用Galerkin方法把悬索的面内运动方程进行离散,然后利用多尺度法对离散的运动方程进行摄动得到主共振情况下的平均方程.接下来对平均方程的稳态解、周期解以及混沌解进行了研究.最后利用Runge-Kutta法研究了悬索两自由度离散模型的非线性响应.